Do you know that the most common topics of all guitarists are often how to relic a guitar? What does it mean when they discuss this topic on a regular basis? In fact, they are mentioning about creating a newer instrument look shabby.
This point is similar to wearing in clothing that looks older than the real age. Surprisingly, relicing a guitar is profitable than newer guitars. There are many instruments you can relic like a guitar, a trumpet, a brass, etc. Keep on reading and you will know how to do that on a guitar.
Prepare your instrument
Of course, your target instrument at this moment is your guitar. So, you should take your guitar first to begin the relicing process.
Before making the appearance, you will need to get rid of the strings. Unroll the strings if they are moderately new. If they are old and the string loses, you will know that this has already been removed.
After that, you break them with wire cutters. Please note that aged string will not get any benefit when you relic your instrument.
Detach the metal elements
You should detach all metal components through a screwdriver. In fact, old metal pieces of the guitar are not vital, but it can add to the overall look at all.
Also, you should be careful when removing the pickguard from your instrument when you have one. Most guitars are wired, so the pickguard is enclosed to the input jack.
In case it is attached, you can clip the connection using wire cutters as well. Please keep in mind that you are able to do that if you are sure the completed preparation or find the right person to help you do this job to fix the connection back.
Identify all parts of your guitar
It is a ridiculous when you want to relic your guitar but you do not understand all parts in this! There are some ways to remove gear from your guitar which are great. Do not place everything in a large pile to be solved later.
It can support you to take photos when you get rid of all parts as a reminder of where everything goes. Set all parts into piles as follows:
- Metals from the neck in a spot only
- The pickguard and other metals in a pile
- The parts of the bridge in another
- Check the screws which ones go with what element
Upsetting the metal
Make scratches on the metal regularly
Use a metal file to upset major pieces of the guitar. Additionally, you should choose components wisely when you want to file onto. Avoid scratching and impact the pick-ups directly.
Do not add too much pressure to evade appearing obvious. What’s more, you should undertake this to the tuning pegs, bridge, and input jack as well.
Wait for the damaging from the natural condition
You are able to leave some of the metal pieces outdoors to let them have the natural condition. This can cause rust that is a popular point of a relicing guitar. Then, you should leave the metal parts outside for two days.
Thereafter, you check all parts before trying different techniques. Remember that you should not leave the pickups or other electrical elements of the instrument outdoors.
Use chemicals to make an aged surface of the metals
Find a chemical to create an aged effect on the metals is not easy, but you can select a household bathroom cleaner instead.
A cleaner with bleach or ammonia is a smart choice, but do not combine both chemicals at once. You will create dangerous chemicals that you do not know!
Lay all pieces of metal into a bucket with 3 parts water to 1 part bathroom cleaner as well. Then, you should wait for about 3 hours and check the condition again. Do this again until you see the desired look. Someone will leave them soaking up to 11 hours.
Adjust the age of your guitar
In fact, this is an optional step because the sound of your instrument is not really good at all. You enable to determine the age of your pickups when you have metal humbuckers, silver or gold.
In addition, you need to get rid of the casing to prevent the damage condition in the literal pickup. This will happens in what pickup you have.
When you have steel casing…you need to use muriatic acid
You should wear rubber gloves and pay attention to the usage precaution to wrap both your mouth and eyes. Add the solution to a cloth and lay out a thin layer over the case.
Wait about 10 or 15 minutes to see the case is dry. When you want to make old the pickups, then you should repeat this process again. Do not age it too much!
When you get single coil pickups…
You are able to get away with soaking the casing in coffee for an aged exterior. Then, wait about 30 minutes to see the case soak and let it completely dry before using it again. Do this job again when you did not catch the desired colors.
Relic the guitar
I have known that you want to undertake this part first and you can skip prior parts in my guide. However, there is not any shortcut to do this task. How to relic a guitar? You should be patient and try to practice it on a regular basis.
Absolutely, you need to relic the body of your guitar, neck, and the headstock. These parts are not complicated to age. Manufacturers do it all the time by improving the varnish’s fraying. They often use the fine grit sandpaper. However, you need patience for the process.
Additionally, natural wear takes place wherever the act of playing, storing or conveying the guitar causes damage. Fortunately, there are various images online or you can take your own note of your style of playing has in many areas.
In a nutshell, it is not difficult to relic an instrument like a guitar. Once you remember each step and practice these on a regular, how to relic a guitar is not your main question anymore. Do not surprise this point because most guitarists also do the similar thing like you in this situation.
Resource: Electric Melody – Best Acoustic Electric Guitars